ATEX Explosion Protected Weigt indicator INDATEXGRM68-3GD
Equipped with a large LED display so that the weight can be read from a distance of more than 25 m. Equipped with stainless steel housing IP 68. CE-M-verifiable. Suitable for use in potentially explosive atmospheres (zone 2 & 22).
See further under Product Information.
-
Type: INDATEXGRM68-3GD Version: Verifiable Item code: 236201 Price € 695.00
-
Type: INDATEXGRM68-3GD-AN+ Analogue output Version: Verifiable Item code: 236202 Price € 795.00
-
Type: INDATEXGRM68-3GD-PB + profibus Version: Verifiable Item code: 236203 Price € 850.00
-
Price € 00.00
ATEX Explosion Protected Weigt indicator INDATEXGRM68-3GD
VERSIONS
- INDATEXGRM68-3GD (Standard version)
- INDATEXGRM68-3GD-AN (with 16-bit analog output)
- INDATEXGRM68-3GD-PB (with Profibus).
MAIN FEATURES
- Functional waterproof keyboard with 5 keys.
- Large 6-digit display, 60 mm high, with high-efficiency SMD LEDs (software brightness intensity adjustment), complete with 6 LEDs to indicate active functions, visible from more than 25 m, with viewing angle up to 120° and with power up to 750 mcd.
- IP68 stainless steel housing 165 x 410 x 68 mm, complete with wall mounting bracket.
- Calibration, set-up parameters, configurable from the keyboard or from PC with optional PC software.
- max. 10,000e or multirange 2 x 3000e @ 0.3 µV/e in CE-M CE-M approved version for commercial use.
- max. 800,000 displayable parts visible with internal resolution up to 3,000,000 points.
- Up to 8 signal linearization points with optional PC software.
- A/D 24 bit sigma-delta 4 channel conversion, max.400 conv./sec. with automatic selection.
- Connectable with up to 8 analog load cells with 350 Ohm input resistance.
- Management of a weighing system with up to 4 cells with digital equalization or management of up to 4 independent weighing systems.
- Power supply from 110-240 Vac.
- Available as an indicator or as a repeater version.
I/O SECTION
- RS232/C bi-directional port configurable for connection to printer, PC or other external equipment.
- RS485 bi-directional port configurable for connection to PC, PLC or other external equipment.
PROFIBUS bidirectional port (model INDATEXGRM68-3GD-PB)
- 2 MOSFET 150 mA 48 Vac / 150 mA 60 Vdc (NO) outputs, with configurable functions.
- 2 opto-isolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
- 16-bit analog output (model INDATEXGRM68-3GD-AN) 4-20mA / 0-5Vdc / 0-10Vdc selectable; maximum
- applicable voltage resistance: 300 Ohm; minimum applicable voltage resistance: 1 kohm.
NOTE
All cables must be installed and protected according to electrical equipment standards.
FUNCTIONS
VIA KEYBOARD
- Zero setting
- Semi-automatic and presettable tare, print and/or data transmission
- On standby.
SELECTABLE
- High-resolution weighing (10x more accurate weight display)
- Net/gross or lb/kg conversion
- Cumulative weighing
- Formula weighing
- CE-M approved weight transfer to PC/PLC (with optional alibi memory)
- Piece counting
- Weighing of incoming/outgoing vehicles
- Hold (last weight display remains in display when scale is unloaded)
- Peak value
EXTERNAL INPUT
- Simulation of key press
- Keypad lock.
MOSFET OUTPUT
- Set Point Control on weight, either positive (when loading) or negative (when unloading), or on quantities (piece counting mode), with programmable switch-on/off thresholds, as direct control or for weight stability.
SERIAL PORTS on all models
- Reading of the net, gross and tare weight
- Clearing
- Semi-automatic and pre-settable tare
- On-off switch
- Setting activation thresholds for outputs
- Read/write Alibi memory.
Models INDATEXGRM68-3GD and INDATEXGRM68-3GD-AN
- Microvolt or ADC converter readout for all channels
- Message display
- Setting of APW (average piece weight) in counting mode
- Simulation of key press
- MODBUS serial protocol.
VIA 16 bit ANALOG OUTPUT (INDATEXGRM68-3GD-AN)
- Analog output proportional to net or gross weight, either positive (when loading) or negative (when unloading).
Options:
- Item code 284701: wall bracket, stainless steel
- Item code AC023: internal real-time clock module
- Item code AC038: internal alibi memory module for max. 120.000 weighings, incl. real time clock
- Item code AC302: internal ethernet interface
- Item code AC303: wireless connection through radio frequency module AS-RFEX
Remaining options, for use in safe area only:
Looking for a special application? Call or email us for advise and posibilities.
Scale types: ATEX explosion protected weighing equipment, Atex single weighing components, Weight indicators Application: Scales for Industry